MOARkNOBS-42 Browser Configurator

Control Deck

Slot-first workstation for live editing, recovery, and telemetry.

fw – schema – memory
Disconnected
Connected to: —
Power: — LED cap: — Rail: —
Web Serial Powered Real-time Slot Telemetry Patch-safe Writing
Transport · Direct USB Staged config · Apply required Live firmware · Writes now Browser only · Local hints
Recovery & Profiles Slot A • local target
Profile slot
Guided profile save

Device-backed switch/save only enables when firmware reports support.

Connect to the device to start the guided flow.

Macro snapshot

Temporary EEPROM snapshot. Enabled only when firmware reports macro storage support.

Connect to see whether macro storage is available.

Scenes

Store six named scene snapshots when firmware reports scene storage support.

Connect to see whether scene storage is available.

Download/upload always works as a file backup. Device-backed profile save, switch, and reset only enable when firmware reports support.

Live Slots

Six columns to mirror the PCB. Click a slot or ride the arrow keys to roam.

OFF CC NOTE PC PB NRPN SX

Envelope Levels

Selected Slot

Keep the slot grid visible while editing one target at a time.

Staged config Labels stay local

EF Followers

Route each envelope follower to a slot and tweak ahead of showtime.

MIDI Slots

Pick a slot, swap MIDI Type, and rehearse your patch before the crowd spills coffee.

Envelope Assignments

Click slot chips to assign or unassign each follower. One follower can stalk multiple slots.

Filter
ARG Pair

Slot Details

Focused snapshot of the currently selected slot without repeating the live slot wall.

Slot
Status
MIDI Type
Channel
Data
EF Index
EF Filter
EF Tuning
EF Dynamics
EF Baseline
ARG Mode
ARG Sources
Last Value
Debug Log

0 entries stored in this browser


      

Migration Needed

Firmware and UI disagree about the current schema. Export your preset, review the migration patch, then apply it when you are ready. Nothing is written to the device until you confirm.


      

Panic & Recovery

Hardware panic is still the first move. Firmware update guidance lives here on demand instead of in the utility rail.

Hardware Panic

Press Ctrl0 + Ctrl1 + Ctrl2 to stop arp, disable EF follow, and reload the active profile baseline.

Firmware Handoff

Connect to a device or arm the simulator to rehearse the update path.

Offline • no staged config • no config backup • 0 log entries stored

The browser cannot flash firmware directly. `ENTER_CONFIG_MODE` is a configurator reboot, not the Teensy bootloader.

teensy_loader_cli -mmcu=teensy40 -w mn42-firmware.hex
pio run -d firmware -t upload -e teensy40_main

Reconnect after flashing and confirm MOARkNOBS-42 • fw unknown • schema ?.